PEATY'S Holeshot Tubeless Puncture Plugger Kit
Pricing
OUR PRICE £24.99
In Store Now
| Options | Matte Black In Stock Matte Bourbon In Stock Matte Navy In Stock Matte Silver In Stock Matte Red CURRENTLY UNAVAILABLE |
|---|---|
| Description | When you ride tubeless, you need to be prepared for every eventuality. There are some holes you just can't fix with tubeless sealant - the classic is a pinch flat puncture or "snake bite" where the soft tyre is pinched between the edge of the hard rim and a much harder rock. Tubeless tyre plug tools have existed for years. Most have taken what existed already for motorbikes and just shrunk it for mountain bikes. Here at Peaty's we have redesigned the tubeless tyre plugger to make fixing your tyre as simple and easy as possible. Peaty's unique single-sided design allows for multiple plug sizes to be easily rolled into the recess of the tool's fork and pushed straight into the tyre. The open side to the fork then allows for the tool to be easily pulled back out of the hole without pulling the plug out with it. No fumbling around with your gloves on trying to thread a needle like you have to with a traditional fork design, this is super quick to apply and delivers perfect results every time. Made from high quality 316 stainless steel, the fork is designed to be as short as possible to reduce the chance of you puncturing your rim tape when inserting a plug. The fork has also been designed with a reaming texture on the shaft, to clean out punctures before plugging, and to be as slim as possible, so it doesn't widen the size of the hole already there. Shrinking down to a tiny 65 x 19mm, this tool has been designed to easily fit into your pocket or slot into a tool wrap or backpack. With knurling on the tool base and ribbing on the lid, you shouldn't have any issues gripping the tool, even in the muddiest of conditions. Simply unscrew the lid and thread it onto the rear of the tool to make a sturdy handle to hold onto while inserting the plug. This pack includes three thick (3mm) plugs and three thin (1.5mm) plugs. These plug sheets can be neatly wrapped around the fork and stored neatly inside the compact water-sealed body. Holeshot refill plug sheets are available separately. - Available in 12x Chris King colours - Quick and easy to insert tyre plugs: with the unique single-sided fork design, you simply push and roll the plug into the hook of the fork - With no tight gap to squeeze through, the plug is far less likely to pull back out when the tool is extracted the fork is sharp tipped and as slim as possible so it doesn't widen the size of the hole already there - Fork made from 316 stainless steel - Body made from anodised 6061 aluminium - Knurled body and ribbed lid / handle for extra grip - Weather sealing O-rings make the tool waterproof when assembled - Each kit comes with one sheet of 3x 1.5mm and one sheet of 3x 3mm plugs |
As with any product, specification is subject to change without prior notification. You are advised to confirm current specification before buying.
